What is CNC Machine? A CNC machine or a Computer Numerically Controlled system which uses computer software and CNC controller electronics to drive a mechanical system. Using this setup, it is possible to achieve far better accuracy and pre...
|Working area||400mm*600mm *100mm|
|Frame material||The machine is 6061 aluminum. Panel is 6063 aluminum.|
|Type of Screw||TBI SFU1605 ball Screw|
|Rail type||Chrome plate shaft + Linear Bearings(surface hardening 61 HRC)|
|Spindle Motor(rated voltage)||800W(600HZ 1500WVFD)|
|Cooling mode||Water cooling|
|Control system||Mach3 / USB port|
|Collet type||ER11 1/8"(3.175mm)and 6mm collet|
|Stepper motor||57Type 4A|
|Max. working speed||4000mm/min(engraving speed: 50-3500mm/min)|
|Repeat positioning||Less than or equal to 0.02mm|
|Command code||G Code (tap, nc, ncc, text)|
Need help or have a question? If you have any questions or need further information, please Click the button.