Features of Wood CNC Router The CNC Machine is mainly used to engrave and cut the wood board cabinets MDF PVC plastic acrylic etc. The machine body is made of thick welded steel tubes which have gone through strict tempering and stres...
The CNC Machine is mainly used to engrave and cut the wood board, cabinets, MDF, PVC, plastic, acrylic, etc.
The machine body is made of thick welded steel tubes which have gone through strict tempering and stress relief treatment, not easy to deflect.
1. Using DSP Controller, Stepper Motor and Driver, Italy HSD Air cooling spindle, Taiwan Delta Inverter, Taiwan Hiwin Linear Rails.
2. With Vacuum and T-slot combined table, for small work piece, use clamps to fix the material; for large sheet, use vacuum for adsorption.
3. Considering to the customers’ different sizes requirements, we can provide ZM1530, ZM2030, etc.
Woodworking Industry: door, Cabinets, tables and chairs, office wood furniture.
Cabinet processing: Insulation, plastic and chemical, PCB, ABS, PP, PE and other carbon mixture.
Decoration Industry: Acrylic, PVC, MDF.
|X,Y,Z Working Area||1300x2500x200mm|
|X,Y,Z Traveling Positioning Accuracy||±0.03/300mm|
|X,Y,Z Re-positioning Accuracy||±0.03mm|
|Table Surface||Vacuum and T-slot Combined|
|X, Y Structure||Rack and Pinion, Hiwin Linear Rail|
|Z Structure||Hiwin Rail Linear and Ball Screw|
|Max. Power Consumption||(Without Spindle) 3.5Kw|
|Max. Rapid Travel Rate||40000mm/min|
|Max. Working Speed||30000mm/min|
|Drive Motors||Big step motor|
|Working Voltage||380V, 3phase|
|Command Language||G Code|
|Operating System||DSP System|
|Flash Memory||512M(U Disk)|
|Software Compatibility||Artcam Software|
|Running Environment Temperature||0 - 45 Centigrade|
|Relative Humidity||30% - 75%|
Need help or have a question? If you have any questions or need further information, please Click the button.